 
 |
The On-Furnace Smelter Type Electrode Jointing Device allows for electrode
Lift Assembly - Takes the new electrode section from the horizontal to the vertical and is flown to the furnace.
Manual Turning Band - Allows the operator to manual spin the new electrode section down to meet the existing electrode. The self-lowering threaded stem allows for the spin-down to be performed at the same thread pitch as the column.
Torquing Bands - Once the electrode section has been spun-down, the pneumatic torquing band are positioned on the joint where the operator then initiates the pneumatic device; torquing the electrodes against each other.
For further inquiries and product specifications, please contact us. |
assembly to be accomplished on-furnace while the furnace is operational. The components of this system allow for a new electrode section to be taken from horizontal to vertical, and flown to the furnace where it can be manually spun-down to meet the existing electrode at the same thread pitch. Once that is completed, a pneumatic cylinder then initiates torque on the joint meeting the manufacturer's recommended torque value. Below is a breakdown of the components and their operational duties: